| 2024-01 |
Evaluating tensile strength of cement paste using multiscale modeling and in-situ splitting tests with micro-CT |
Construction and Building Materials
|
| 2023-12 |
통계분석 알고리즘 프로그램을 활용한 동시 인상 3D 콘크리트 프린팅의 성능 분석 |
한국전산구조공학회논문집
|
| 2023-10 |
시멘트풀의 공극분포특성에 기반한 인장강도 예측 CNN모델 |
한국전산구조공학회논문집
|
| 2023-10 |
U-net 딥러닝 기법을 활용한 PVA 섬유 보강 시멘트 복합체의 섬유 분리 |
한국전산구조공학회논문집
|
| 2023-05 |
Multi-scale analysis framework for predicting tensile strength of cement paste by combining experiments and simulations |
Cement and Concrete Composites
|
| 2023-04 |
마찰해석모델에 따른 PVDF/MgO 마찰재 적용 면진 장치가 설치된 교량의 성능 비교 분석 |
한국전산구조공학회논문집
|
| 2022-08 |
3D 콘크리트 프린팅된 모르타르 프리즘 시편의 강도 분석 |
한국전산구조공학회논문집
|
| 2022-08 |
Mechanical behavior comparison of single and multiple phase models for cement paste using micro-CT images and nanoindentation |
CONSTRUCTION AND BUILDING MATERIALS
|
| 2022-04 |
Gradient-based phase segmentation method for characterization of hydrating cement paste microstructures obtained from X-ray micro-CT |
Journal of Building Engineering
|
| 2022-02 |
쌍대비교행렬 분석 기법을 적용한 스마트 자동 인상 시스템의 성능 분석 |
한국전산구조공학회논문집
|
| 2022-02 |
Characterization of foamed concrete with different additives using multi-scale micro-computed tomography |
CONSTRUCTION AND BUILDING MATERIALS
|
| 2021-12 |
Pore and Solid Characterizations of Interfacial Transition Zone of Mortar Using Microcomputed Tomography Images |
JOURNAL OF MATERIALS IN CIVIL ENGINEERING
|
| 2021-10 |
Framework to Evaluate Seismic Fragility of Bridges Considering Component Damage Correlations |
JOURNAL OF EARTHQUAKE AND TSUNAMI
|
| 2021-10 |
그라파이트 혼입량에 따른 에너지 저장 콘크리트의 미세구조 및 열전도도 분석 |
한국전산구조공학회논문집
|
| 2021-08 |
시멘트 대체재로 소성 이회암 점토를 활용한 에코콘크리트 개발 |
한국방재학회논문집
|
| 2021-08 |
PVDF/MgO 마찰재를 이용한 마찰면진장치의 성능 분석 |
한국전산구조공학회논문집
|
| 2021-06 |
Reconstruction of Three‑Dimensional Microstructures of Two‑Phase Membrane and Phase Property Estimation Through Combination of Experiment and Simulation |
Multiscale Science and Engineering
|
| 2021-02 |
Comparison of microstructure characterization methods by two-point correlation functions and reconstruction of 3D microstructures using 2D TEM images with high degree of phase clustering |
MATERIALS CHARACTERIZATION
|
| 2020-12 |
Effect of carbonation on cement paste microstructure characterized by micro-computed tomography |
CONSTRUCTION AND BUILDING MATERIALS
|
| 2020-10 |
PRB 지진격리장치의 성능 검증을 위한 해석 및 실험적 연구 |
한국전산구조공학회논문집
|
| 2020-09 |
Phase Stiffness Estimation of Two‑phase Pebax/PBE Membranes Using Reconstructed 3D Microstructures |
Multiscale Science and Engineering
|
| 2020-09 |
Correlation between microstructural characteristics from micro-CT of foamed concrete and mechanical behaviors evaluated by experiments and simulations |
CEMENT & CONCRETE COMPOSITES
|
| 2020-07 |
Modeling of multiple phase solid microstructures and prediction of mechanical behaviors of foamed concrete |
CONSTRUCTION AND BUILDING MATERIALS
|
| 2020-05 |
Investigation of phase composition and microstructure of foamed cement paste with different supplementary cementing materials |
CEMENT & CONCRETE COMPOSITES
|
| 2020-05 |
Sensitivity and uncertainty estimation of cement paste properties to microstructural characteristics using FOSM method |
CONSTRUCTION AND BUILDING MATERIALS
|
| 2020-02 |
Wear-resistant carbon nanorod-embedded poly(vinylidene fluoride) composites with excellent tribological performance |
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
|
| 2020-01 |
Identifying significant earthquake intensity measures for evaluating seismic damage and fragility of nuclear power plant structures |
NUCLEAR ENGINEERING AND TECHNOLOGY
|
| 2020-01 |
Impregnation approach for poly(vinylidene fluoride)/tin oxide nanotube composites with high tribological performance |
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
|
| 2019-12 |
Overview of the use of micro-computed tomography (micro-CT) to investigate the relation between the material characteristics and properties of cement-based materials |
CONSTRUCTION AND BUILDING MATERIALS
|
| 2019-10 |
접착영역 모델을 사용한 2상 리튬 이온 충전 시 실리콘 음극 전극의 균열진전 해석 |
한국전산구조공학회논문집
|
| 2019-09 |
Microstructure characterization of cement paste from micro-CT and correlations with mechanical properties evaluated from virtual and real experiments |
MATERIALS CHARACTERIZATION
|
| 2019-09 |
Construction of virtual interfacial transition zone (ITZ) samples of hydrated cement paste using extended stochastic optimization |
CEMENT & CONCRETE COMPOSITES
|
| 2019-07 |
Effects of Void Clustering on the Thermal and Mechanical Properties of Concrete Evaluated Using Numerical Methods |
Multiscale Science and Engineering
|
| 2019-06 |
Seismic fragility analysis of base-isolated lng storage tank for selecting optimum friction material of friction pendulum system |
JOURNAL OF EARTHQUAKE AND TSUNAMI
|
| 2019-06 |
Comparison of lightweight aggregate and foamed concrete with the same density level using image-based characterizations |
CONSTRUCTION AND BUILDING MATERIALS
|
| 2019-04 |
High tribology performance of Poly(vinylidene fluoride) composites based on three-dimensional mesoporous magnesium oxide nanosheets |
COMPOSITES PART B-ENGINEERING
|
| 2019-03 |
Issues on characterization of cement paste microstructures from μ-CT and virtual experiment framework for evaluating mechanical properties |
CONSTRUCTION AND BUILDING MATERIALS
|
| 2018-12 |
Phase field modeling of crack propagation under combined shear and tensile loading with hybrid formulation |
COMPUTATIONAL MATERIALS SCIENCE
|
| 2018-05 |
Investigation of mechanical properties and microstructure of cement paste with glass beads using crack phase field model and lineal-path function |
CEMENT WAPNO BETON
|
| 2018-05 |
Area of lineal-path function for describing the pore microstructures of cement paste and their relations to the mechanical properties simulated from m-CT microstructures |
CEMENT & CONCRETE COMPOSITES
|
| 2017-04 |
마찰재 물성변화에 따른 마찰진자시스템을 적용한 LNG 탱크의 지진취약도 분석 |
한국전산구조공학회논문집
|
| 2017-04 |
Structural, thermal, and tribological properties of poly(vinylidene fluoride)/nano-TiO<inf>2</inf>composites prepared by dry-mixing and hot-press technique |
MACROMOLECULAR RESEARCH
|
| 2016-10 |
확률 최적화를 활용한 연속적인 공극비 기울기를 갖는 시멘트 풀 가상 시편 제작 및 투기율 분석 |
한국전산구조공학회논문집
|
| 2016-07 |
Negative Poisson’s ratio in cubic materials along principal directions |
PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS
|
| 2016-05 |
Effects of anisotropic voids on thermal properties of insulating media investigated using 3D printed samples |
CONSTRUCTION AND BUILDING MATERIALS
|
| 2016-01 |
Evaluation of effect of glass beads on thermal conductivity of insulating concrete using micro CT images and probability functions |
CEMENT & CONCRETE COMPOSITES
|
| 2015-07 |
The effect of transverse loading on the ideal tensile strength of face-centered-cubic materials |
EPL
|
| 2015-07 |
Reconstruction and evaluation of the air permeability of a cement paste specimen with void distribution gradient using CT images and numerical methods |
CONSTRUCTION AND BUILDING MATERIALS
|
| 2015-04 |
Spatial Distribution of Voids in Insulating Concrete Analyzed by Micro-CT Images and Probability Functions |
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING
|
| 2015-03 |
Effect of phase interactions on crystal stress evolution over crystal orientation space under elastoplastic deformation of two-phase polycrystalline solids |
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
|
| 2014-09 |
Investigation of the permeability of porous concrete reconstructed using probabilistic description methods |
CONSTRUCTION AND BUILDING MATERIALS
|
| 2014-06 |
다면체 사석배열 해안구조물에 대한 수치해석모델의 모델링 기법 검증 |
대한토목학회논문집(국문)
|
| 2014-01 |
Evaluation of Hydraulic Conductivity of Reconstructed Granular Media Generated using Low-order Probability Functions |
KSCE JOURNAL OF CIVIL ENGINEERING
|
| 2013-11 |
Evaluation of the anisotropy of the void distribution and the stiffnessof lightweight aggregates using CT imaging |
CONSTRUCTION AND BUILDING MATERIALS
|
| 2013-07 |
Crystal stress distribution evolution of elastoplastically deforming polycrystals over crystal orientation space |
COMPUTATIONAL MATERIALS SCIENCE
|
| 2013-06 |
Evaluation of thermal conductivity for thermally insulated concretes |
ENERGY AND BUILDINGS
|
| 2013-04 |
마이크로 CT 이미지를 활용한 단열콘크리트 시편의 성분 분석 |
한국방재학회논문집
|
| 2013-04 |
Correlation between low-order probability distribution functions and percolation of porous concrete |
MAGAZINE OF CONCRETE RESEARCH
|
| 2013-01 |
Reliability-based optimisation design of post-tensioned concrete box girder bridges considering pitting corrosion attack |
STRUCTURE AND INFRASTRUCTURE ENGINEERING
|
| 2012-10 |
Dependence of crystal stress evolution on the vertices of the single crystal yield surface and the effect from the intergranular misorientation during plastic deformation |
COMPUTATIONAL MATERIALS SCIENCE
|
| 2012-08 |
Investigation of crystal stress dependence on lattice orientation, loading direction, and grain interactions in a plastically deforming crystal embedded within a polycrystal aggregate |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
| 2012-06 |
CT 이미지를 활용한 경량 골재의 방향에 따른 공극 분포 및 강성도의 이방성 분석 |
한국전산구조공학회논문집
|
| 2012-03 |
해석적 모의조파실험을 이용한 해안사석구조물 형상에 따른 해저면 세굴 방지 성능 비교 |
대한토목학회 논문집A
|
| 2012-03 |
Blast-resistant characteristics of ultra-high strength concrete and reactive powder concrete |
CONSTRUCTION AND BUILDING MATERIALS
|
| 2012-02 |
Development of satisfaction curves to evaluate concrete mix design performance using a Bayesian probabilistic method |
CONSTRUCTION AND BUILDING MATERIALS
|
| 2012-01 |
유체-구조 상호작용을 고려한 해안구조물의 해저면 세굴에 대한 조파실험 해석 기법 연구 |
대한토목학회 논문집A
|
| 2012-01 |
투수 콘크리트의 미세구조 CT 이미지와 확률 분포 함수를 사용한 투수성 분석 |
대한토목학회 논문집A
|
| 2011-12 |
투수 콘크리트의 투수성과 확률 분포 함수의 상관관계 분석 |
한국방재학회논문집
|
| 2011-08 |
Bending behavior, and evolution of texture and microstructure during differential speed warm rolling of AZ31B magnesium alloys |
ACTA MATERIALIA
|
| 2011-07 |
Simplified formulations for flutter instability analysis of bridge deck |
WIND AND STRUCTURES
|
| 2011-04 |
소성 구배의 영향을 고려한 다결정 고체 내부의 결정 거동 분석 |
한국방재학회논문집
|
| 2011-04 |
섬유혼입 고강도 콘크리트의 열전달 및 역학적 거동 해석모델에 대한 연구 |
한국방재학회논문집
|
| 2011-04 |
역학적 등방성을 가진 2상 다결정 미세구조의 재구성 기법 |
한국방재학회논문집
|
| 2011-04 |
섬유혼입 내화 고강도 콘크리트의 열전달 모델 |
한국전산구조공학회논문집
|
| 2011-04 |
GND 효과에 의한 소성 구배의 다결정 고체 거동에 대한 영향 |
한국전산구조공학회논문집
|
| 2011-04 |
Performance of volume average scale linking in a strongly-coupled two-scale finite element methodology for polycrystalline solids |
COMPUTATIONAL MATERIALS SCIENCE
|
| 2011-02 |
Percolation 이론을 이용한 내화 고강도 콘크리트의 내부 섬유 연결성 파악 |
한국방재학회논문집
|
| 2011-02 |
2상 다결정 미세구조의 상 분포 위상에 따른 역학적 거동 분석 |
한국전산구조공학회논문집
|
| 2010-10 |
Reconstruction of random two-phase polycrystalline solids using low-order probability functions and evaluation of mechanical behavior |
Computational Materials Science
|
| 2010-09 |
확률 분포 함수의 지수 곡선 접합을 이용한 RVE 적합성 평가 |
대한토목학회논문집A
|
| 2010-01 |
Load partitioning between single bulk grains in a two-phase duplex stainless steel during tensile loading |
ACTA MATERIALIA
|
| 2008-09 |
Measuring and modeling distributions of stress state in deforming polycrystals |
Acta Materialia
|
| 2008-03 |
Out-of-plane buckling and design of X-bracing systems with discontinuous diagonals |
Journal Of Constructional Steel Research
|
| 2007-03 |
A two-scale deformation model for polycrystalline solids using a strongly-coupled finite element methodology |
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
|
| 2005-09 |
Lattice strain partitioning in a two-phase alloy and its redistribution upon yielding |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
|
| 2005-07 |
An accelerated methodology for the evaluation of critical properties in polyphase alloys |
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
|
| 2005-03 |
Representation of anisotropic phase morphology |
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
|
| 2004-09 |
Investigating the effect of grain interaction during plastic deformation of copper |
ACTA MATERIALIA
|
| 2004-08 |
Seismic analysis of reinforced concrete frame buildings using interface modeling |
JOURNAL OF STRUCTURAL ENGINEERING-ASCE
|
| 2003-11 |
Simulation of highly ductile fiber-reinforced cement-based composites under cyclic loading |
ACI STRUCTURAL JOURNAL
|
| 2002-05 |
Delamination buckling and propagation analysis of honeycomb panels using a cohesive element approach |
INTERNATIONAL JOURNAL OF FRACTURE
|